Pipe bend size, equal tee range weight

The much more prevalent pipe fittings incorporate bends, tees, minimizing tees, eccentric and concentric reducers, KANGDA and pipe clamps.

pipe bends - Bends are generally stocked as 45, 90 or 180 degree. Three commonmanufacturing processes are pulled bends (cold drawn bend), pressed bends and lobsterback bends. The course of action of manufacturing normally relates to the diameter on the pipe and

the thickness of material utilised. Up to and including 152.4mm the bends are normally pulled, by far by far the most usually supplied bends. Pressed bends is usually from 101.6 to 305mm OD. Lobster back bends

are usually supplied in diameters 101.6mm and

above and these bends are used generally to suit spiral welded pipe.

Pipe Tee - Two frequent processes of manufacturing are welded or pulled tees. To retain product top quality and consistency welded Pipe Tee are stocked as opposed to pulled tees.

Pipe Tee are stocked in two forms; equal or decreasing. An equal tee has all three branches on the tee equal in diameter. A minimizing tee features a lowered diameter of pipe on the branch section of your tee.

As pipe fittings are generally made use of inside the food industry and hygiene is significant several of these fittings are stocked inside a polished finish.

Pipe fittings size (bend and equal tee) range weight(kg)
Dimensions OD		Bends 45degree		Bends 90degree		Bends 180degree		Equal tee
Dimensions OD		WT(mm)		WT(mm)		WT(mm)		WT(mm)
mm inches		1.6-------2		1.6--------2		1.6-------2		1.6 ----2
9.52	3/8	0.01	0.01	0.01	0.01	0.01	0.01	0.03	0.04
12.70	1/2	0.01	0.01	0.01	0.01	0.01	0.01	0.05	0.05
19.05	3/4	0.02	0.02	0.02	0.03	0.03	0.03	0.08	0.09
25.40	1	0.03	0.04	0.04	0.04	0.05	0.06	0.13	0.15
31.75	11/4	0.05	0.06	0.06	0.07	0.08	0.09	0.20	0.25
38.10	11/2	0.07	0.08	0.08	0.10	0.11	0.13	0.30	0.38
50.80	5	0.12	0.15	0.15	0.18	0.20	0.24	0.50	0.65
63.50	21/2	0.18	0.23	0.23	0.29	0.31	0.38	0.80	1.10
76.20	3	0.27	0.33	0.34	0.42	0.45	0.56	1.10	1.50
101.6	4	0.48	0.60	0.60	0.75	0.80	1.00	1.60	2.30
127.0	5	0.75	0.94	0.95	1.17	1.26	1.57	1.80	3.80
152.4	6	1.09	1.36	1.36	1.7	1.81	2.26	2.80	5.40
203.2	8	1.94	2.42	2.42	3.02	3.23	4.03	3.50	8.40
254.0	10	2.90	3.49	3.50	4.50	4.70	5.05	4.30	9.90

To maintain a degree of good quality and consistency Atlas stocks pulled bends with an extended leg. The significance of this style of bend guaranPipe Tee each and every finish on the bend is completed off accurate and accurate. The extended leg provides the capability to preserve the original circularity of the pipe along with a precise 45 or 90 degree radius measured from across the finish face from the bends.

上一篇：Pipe Elbow Product Geometry (not to scale)

下一篇：Socket Weld 45°elbow , Threaded carbon steel A105 45°elbow